If you are considering a 3D printer, you might be interested in the cost to print. Here I want to talk just about the cost to print and not the cost for the initial purchase of the 3D printer. The...
Posts by Verl Humpherys
I have printed in both warm and cold rooms and there is a significant difference in the print quality that results. Standard room temperature, 68–72 °F (20–22 °C), is the best room...
We all want the perfect 3D print. When we get our new 3D printer, there are multiple calibration steps you will want to take to tune your printer for optimal printing. PID Tuning For Optimal...
There are not many reviews of specific brands of filament. So I grabbed 10 rolls of filament from 10 different branch to actual test the filament and tell you what I found. Here is what I found about...
3D printers are accused of using a lot of electricity and are thus harmful to the environment. High end FDM printers use around 50 Watts of power while similar lower cost printers consume as much...
For some people, the only place with room for a 3D printer might be the garage. Other people may need to move their printer to the garage because it is too noisy or is a safety hazard for pets or...